Installation And Connections; How To Install - Pioneer S-DJ50X Mode D'emploi

Installation and Connections

How to Install

A speaker's playback sound is delicately influenced by
conditions in the listening room. To produce optimum listening
conditions, take due consideration of the conditions of your
installation location before beginning actual installation.
 Place the speakers at ear level.
 For a natural stereo effect, the right and left speakers should
be installed in symmetrical and equidistant positions from the
listening position.
Connections
 When making or changing connections, always turn off the
power and disconnect the power cord from its outlet.
 Also, be sure to read the operating instructions for the other
components to which you are connecting these speakers.
 Do not plug in the power cord until all other connections have
been completed.
 Use only the furnished accessory power cord.
8
En
 Speakers should ideally be located at 30 ° angles from the
listening position (together forming a total 60 ° angle), and
rotated inward to face the listening position.
50 °～ 60 °
CAUTION
To promote proper cooling, please assure that sufficient space
is preserved between the speakers and nearby walls or other
components (minimum 30 cm (11.9 in.) or more above, behind,
and to right and left sides of each speaker). Leaving insufficient
space between the speaker and walls or other components may
lead to rising interior temperatures, leading to malfunction or
damage.
• Do not connect to both the XLR INPUT connector and the TRS
INPUT jack at the same time.
• Make sure to set the sound level at an appropriate level as
the input signals to the XLR INPUT connector (or TRS INPUT
jack) and RCA INPUT jack will be mixed together, affecting the
sound level.