Nidek LE-700 Manuel D'utilisation page 16

Specifications
Dimensions and mass
O
• Dimensions
• Mass
• Power supply voltage
• Frequency
• Power consumption
Chucking
O
• Lens chucking
Accessories
O
• Standard accessories
14
543 (W) × 490 (D) × 345 (H) mm
33 kg or less (main body only)
AC 100 to 120 V / 230 V
50/60 Hz
1.0 kVA max. (AC 100 to 120 V), 1.3 kVA (AC 230 V)
Chucking method Electric system
Chuck pressure 45 kgf ±5 kgf
* Can be set for plastic / high index plastic, glass, and other
lenses. Pressing the "Chuck" button first lightly chucks the lens
temporarily and then chucks the lens more firmly for process-
ing.
Spare fuse (2 units), Hexagonal wrench (2.0 mm, 2.5 mm, 4.0 mm), Half-eye lens cup
(green/red 5 units each), Double-coated adhesive pad for half-eye lens cup, Dressing
stick for glass roughing wheel, Dressing stick for finishing wheel, Dressing stick for pol-
ishing wheel, Cup remover, Pattern holder, Calibration jig, Adapter set, Power cord,
OPERATOR'S MANUAL (CD), Read Before Use (printed version)