TEP REPLAY+ Guide Rapide page 36

Unpair the remote control
1. Press MENU and then Settings. Then press
the item for the paired device like
[REPLAY+-5570].
2. A new menu will open, showing you the
status of the battery. Press Unpair to
disconnect the remote control from the TV
Box.
Notes
The pairing mode is valid for 60 seconds. If the pairing is unsuccessful,
-
the pairing mode will be automatically exited, and the green LED will
be off.
When the remote control is paired, it is automatically put to standby
-
after 5 minutes to conserve battery. After a longer period of not using
the remote control, you might need to press a button twice to wake it
up. This is normal operation.
REPLAY+
36