Bluetooth Pairing - TEP REPLAY+ Guide Rapide

Bluetooth Pairing

Your new remote control can work in IR (Infrared) or in BT (Bluetooth) mode.
Infrared operation requires "line of sight" to the TV Box and is the default mode of
the remote control.
If you wish to connect or "pair" your remote control with the TV Box using
Bluetooth, please follow these instructions. Using Bluetooth allows you to put the
TV Box away in a sideboard or behind the TV and does not require you to point the
remote control towards the TV Box.
Pairing the remote control
1. Press MENU and then Settings. You should see a
menu item "Add device" or "Bluetooth".
2. On the remote control, press both [OK] and the
[numerical key 0] at the same time for 3s until the
green LED indicator flashes, the remote control is
now in pairing mode for 60 seconds. Now select
the menu item "Add device" or "Bluetooth" in the
Settings.
3. Make sure that Bluetooth is on. In the list of
Available Devices, you should see a device like
[REPLAY+-5570].
4. Select it and it will pair the TV Box with the
remote control and show up under [Paired
devices]. From now on, the remote control will
only work in Bluetooth mode until it is unpaired.
REPLAY+
35