Important Information; Installation Information - DURAVIT Happy D.2 700316 Notice De Montage

Important information

About the mounting instructions
These mounting instructions come as part of the Duravit
bathtub and should be read carefully prior to installation.
Explanation of the key words and symbols
ADVICE! For avoiding property damage
Link to installation information in this section
Inspection (e.g. for scratches)
Indication of the length of time (e.g. 10 minutes)
Inspect to check for leaks and tightness
Target group and qualification
The bathtub must only be installed by trained plumbing
engineers.
NoTE!
Local installation regulations and any country­specific
standards must be observed at all times.

Installation information

Please read pre­installation datasheets prior to the
installation. These are available to download on the
Internet at www.pro.duravit.com.
3
Installing the cable-driven waste and overflow
The connection hose #790159/ #790166 is
recommended for installing a cable­driven waste
and overflow with a bathtub spout and base inlet.
5
BA_M_with integrated panel/17.05.6