Philips sonicare HX6322/04 Mode D'emploi page 13

3 Press the power on/of button to turn on the Sonicare.
4 Apply light pressure to maximize Sonicare's efectiveness and let
the Sonicare toothbrush do the brushing for you. Do not scrub
(Fig. 7).
5 Maintain light pressure and gently brush the outer and inner
surfaces of all top and bottom teeth while you keep the
toothbrush at an angle such that the toothbrush bristles touch the
area where the teeth and the gumline meet.
6 The inner and outer surfaces of the upper and lower back teeth
are hard to reach. Spend time brushing these areas, apply light
pressure and maintain the angle of the toothbrush bristles to the
gumline (Fig. 8).
7 Brush the chewing surfaces of all the upper and lower teeth.
8 While you maintain the angle of the bristles to the gumline,
gently move the brush head slowly across the teeth in a small
back and forth motion so the longer bristles reach between the
teeth. Continue this motion throughout the brushing cycle (Fig. 9).
Note: To make sure your child brushes evenly throughout the
mouth, divide the mouth into 4 sections using the KidPacer feature
(see chapter "Features").
9 Begin brushing in section 1 (outside top teeth). A short series of
tunes indicate it is time to move to section 2 (inside top teeth).
At the next series of tunes, move to section 3 (outside bottom
teeth). The next series of tunes indicate it is time to move to
section 4 (inside bottom teeth). The toothbrush will automatically
turn of at end of the brushing cycle (Fig. 10).
Your Sonicare is safe to use on:
Braces (brush heads wear out sooner when used on braces)
-
Dental restorations (illings, crowns, veneers)
-
35_020_9980_1_DFU-BS_A6_v1.indd 13
English
13
18/12/15 13:46