Working With The Device; Control Panel - gourmetmaxx Z 09747 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

EN

Working with the device

The device can only be switched on when the mixing bowl is properly seated in
the motor assembly and the lid is locked.

Control panel

23
27 Time Rotary knob for setting the operating time (max. 60 minutes). The device will
automatically stop once the operating time has elapsed. The setting is performed
– in increments of 1 second for up to 1 minute,
– in increments of 30 seconds from 1 to 10 minutes,
– in increments of 60 seconds from 10 minutes and over
A signal will sound 5 seconds before the set time elapses.
If no operating time has been set, the device will automatically switch off after 60
minutes.
28 Temp Rotary knob for setting the temperature (20 °C to 120 °C) which the food will
be heated to.
29 Speed Rotary knob for switching the cross-blade adapter on and off and for setting
its speed to a level between 1 and 12. Once the contents of the mixing bowl have
reached a temperature of 60 °C or more, the maximum speed level is 5.
Display
09747_de-en-fr-nl_V4.indb 46
09747_de-en-fr-nl_V4.indb 46
46
23 P Pulse button: The speed of the cross-blade adapt-
er will increase to 12 (maximum speed) as long as
the pulse button is pushed. For reasons of safety,
24
this function disengages when the contents of
the mixing bowl reach a temperature of 60 °C or
more.
25
24 The heating control light will blink when the mixing
bowl heats up. Once the preset temperature has
26
been reached, it will be continuously illuminated.
25 Heating button: Push the button only if the content
of the mixing bowl is to be heated only (e.g. water
27
when steaming). The cross-blade adapter is deac-
tivated as a result. If no time has been preset, the
28
device heats up to no more than 120 °C (depending
on the boiling point of the food being cooked). Push
29
the button again to switch off the heating function.
26 Display
30 Display showing the elapsed operating time if no op-
erating time is preset. If an operating time has been
30
set with the Time rotary knob, the remaining time
31
until the automatic stop is displayed.
31 Display showing the temperature of the contents of
32
the mixing bowl or display of error messages
32 Display showing the speed level of the cross-blade
adapter (1 to 12)
04.01.2016 16:00:59
04.01.2016 16:00:59

Publicité

Table des Matières
loading

Table des Matières