Télécharger Imprimer la page

Velleman WC32TC Mode D'emploi page 2

Publicité

Les langues disponibles

Les langues disponibles

• Press ALM SET
• Press ALM ON/OFF : the alarm will no longer sound but will be reactivated 24 hours
• Press SNOOZE
• Let the alarm sound : the alarm will ring for a full minute before being deactivated for 24
5. Display Language for Day of the Week
Select the display language for the day of the week with the slide switch at the back. Choose
one of the following languages : English, German, French, Italian or Spanish. Press the RESET
button at the back of the device to display the day of the week in the language of your choice.
Note that the clock, the calendar and the alarm will be reset as well.
6. Temperature Display
Press the DOWN/°C/°F-key at the back when the device is in the normal time mode in order to
switch the temperature read-out from °C to °F and vice versa.
7. 12h- or 24h-Mode
Press the UP/12/24-key at the back when the device is in the normal time mode in order to
switch between the 12h-mode and the 24h-mode. The default setting is in the 12h-mode.
8. Mounting Location
This device can either be mounted on a wall or placed on a table, thanks to the collapsible
supports.
9. Batteries
Remove the cover of the battery compartment at the back of the device and insert two AA-
batteries (or an equivalent) of 1.5V before replacing the cover. Please observe all applicable
laws when disposing of your old batteries.
WC32TC -- MULTIFUNCTIONELE WANDKLOK
1. Inleiding
Proficiat met uw aankoop ! Deze wandklok doet veel meer dan enkel de tijd aangeven. Het
toestel is ook uitgerust met een aantal andere functies : kalender, alarm en
temperatuuruitlezing. De gebruiker kan voor de tijdsuitlezing ook kiezen tussen 12u- en 24u-
mode. Wij zijn ervan overtuigd dat deze multifunctionele klok zal voldoen aan de behoeften van
de meest veeleisende gebruikers.
WC32TC
: the alarm will no longer sound but will be reactivated 24 hours
later. The
symbol remains on the display.
later. The
symbol remains on the display. Press ALM ON/OFF
a second time if you wish to deactivate the alarm permanently (the
symbol is no longer displayed).
: the snooze symbol
alarm is reactivated five minutes later.
hours. The
symbol remains on the screen.
starts to flash on the display and the
2
VELLEMAN

Publicité

loading