Use; Device Overview; Operation - Intenso POWERBANK XS10000 Notice D'utilisation

USE

Device overview

1 - Function key (ON/OFF)
2 - USB A Out
3 - Type C In/Out
4 - microUSB In
5 - Status LEDs

Operation

1. Function key (ON/OFF)
By briefly pressing the key, the current battery status is displayed through the LED lights and the
Powerbank is activated.
If no device is connected to the Powerbank, or the connected device is fully charged, the
Powerbank changes automatically into standby mode after a time interval of approx. 30 seconds.
2. LED Status display
The current charge status of the Powerbank is displayed via the status LEDs when charging or
discharging the Powerbank.
% Energy
1 % - 25 %
26 % - 50 %
51 % - 75%
76 % - 100 %
3. Commissioning / Charging the Powerbank / Charging connected devices
a) Charging the Powerbank
Please connect the supplied USB A to Type C cable with the Type C connection (Type C In/Out) of
the Powerbank and connect the opposite end of the USB cable with the Standard USB Port of a
computer or USB power supply. You can also use a USB A to microUSB cable to charge the
Powerbank through the microUSB connection (microUSB In). Always use only one of the two
charging options, the Type C port (Type C In/Out) or the microUSB port (microUSB In)!
1 2
LED 1 LED 2
EN - Page 3 of 7
3 4
LED light
LED 3
5
LED 4