Use; Device Overview; Operation - Intenso XC10000 Mode D'emploi

USE

Device overview

1 - Status LEDs
2 - USB-A Out
3 - USB-C IN
4 - USB-C OUT
5 - Function key (ON/OFF)

Operation

1. Function key (ON/OFF)
If the charging process dos not start automatically, you can start it manually by briefly pressing the
function key. You can stop the charging process and deactivate the Powerbank by briefly pressing
the key twice.
2. LED Status display
The individual LEDs display the remaining energy of the Powerbank:
% - Energy
1 % - 25 %
26 % - 50 %
51 % - 75%
76 % - 100 %
3. Commissioning / Charging the Powerbank / Charging connected devices
a) Charging the Powerbank
Please connect the supplied USB-C cable with the USB-C connection (USB-C In) of the Powerbank
and connect the other end of the USB cable with a standard USB-A connection of a computer or
USB adapter. The charging process and the current charge status is signalled via the LED status
lights. When the Powerbank is fully charged, the LED status lights are permanently on. The requi-
red charging time of the Powerbank is dependent on the selected charging source and its output
(max. 5V / 3A).
5
1 2
LED 1
EN - Page 3 of 7
3
LED light
LED 2 LED 3
4
LED 4