Kenwood KOS-L432 Mode D'emploi page 7

Installation
Installation using the bracket
(Accessory 3) (For AMPS or T-Bolt
compatible mounts)
When installing to AMPS compatible
mounts
Monitor Unit
Accessory 3
When installing to T-Bolt compatible
mounts
Accessory 3
Monitor Unit
12.7 mm ±0.2
12.7 mm ±0.2
Screws (not supplied)
AMPS compatible mounts
(commercially available)
T-Bolt compatible mounts
(commercially available)
3 mm or less
6.4 mm or less
Removing the Monitor Unit (For
AMPS or T-Bolt compatible mounts)
Monitor Unit
Accessory 3
English
7
|