Wolf E Série Instructions D'installation page 15

I N S TA L L AT I O N I N S T R U C T I O N S
S TA N DA R D I N S TA L L AT I O N
E S E R I E S B U I L T- I N D O U B L E O V E N
The Wolf E Series double oven may be
installed in combination with a Wolf warming
drawer with E Series stainless steel drawer
front or integrated drawer front. Refer to the
illustration below, and pages 10–13 for installa-
tion specifications for E Series double ovens.
S TA N D A R D I N S TA L L A T I O N – M O D E L S I C B D O 3 0 - 2 F / S A N D I C B D O 3 0 - 2 U / S
610 mm 1260 mm
min
22 mm
PLATFORM
232 mm
22 mm
606 mm
min
PLATFORM APPLICATION
Double oven installed above warming drawer with E Series stainless steel drawer front.
O P T I O N S
Keep in mind that the size of the custom
panel for the warming drawer with integrated
drawer front will vary according to the
specific installation. Refer to the installation
instructions provided with the warming drawer
front for detailed specifications. Dimensions
will vary according to the specific installation.
610 mm 1260 mm
min
51 mm 51 mm
x
ANTI-TIP BLOCK
232 mm
60 mm
606 mm
min
ANTI-TIP BLOCK APPLICATION
838 mm
RECOMMENDED CABINET WIDTH
762 mm
724 mm
OVEN OPENING WIDTH
ELECTRICAL LOCATION
WITHIN OPENING
APPLIES ONLY TO
CABINETS DEEPER
THAN 24" (610)
102 mm
727 mm
WARMING DRAWER
OPENING WIDTH
NOTE: Unless you are using cabinets deeper than 610 mm, it is recommended that the
electrical supply for the oven be placed in an adjacent cabinet.
min
E
102
mm
127
mm E E
127
E
mm
15