WALTERSCHEID HOLHS Instructions De Montage page 10

English
FOREWORD
When you receive the hydraulic top link, please
check whether any damage has occurred in transit,
or whether any parts are missing. Use the delivery
note to check the completeness of the hydraulic top
link supplied. You must complain immediately in
order to receive compensation!
Please read and comply with these Operating Inst-
ructions, especially the safety notes, before putting
the top link into service for the first time. Reading
them carefully will enable you to exploit the advan-
tages of your newly acquired product to the full.
Make sure that everyone who is to operate the
hydraulic top link reads these Operating Instructions
before they use the hydraulic top link.
Do not hesitate to contact us if you have any ques-
tions regarding these Operating Instructions or the
handling of the hydraulic top link.
Regular servicing and the timely replacement of
worn or damaged parts will increase the service life
of your hydraulic top link.
INTRODUCTORY REMARKS
These Mounting and Operating Instructions for the
user are subdivided into the following sections:
• Scope of supply
• Safety regulations
• Installing the hydraulic top link
• Operating the hydraulic top link
• General service notes
• Troubleshooting
These Mounting and Operating Instructions describe
only the installation and operation of the hydraulic
top link. They must be handed over with the
tractor in the event of sale! Refer to the appropriate
manufacturer's documentation for the description,
operation, servicing, etc. of the tractor.
GB
ATTENTION
Texts marked with the pictogram shown
on the left contain safety notes that must
be observed without fail in order to avoid
accidents.
Failure to comply with these instructions can
lead to accidents, property damage and/or
personal injury, and may also invalidate our
liability and guarantee.
SPECIAL FEATURE (SPECIAL EQUIPMENT)
HYDRAULIC TOP LINK WITH SHOCK AB-
SORBER (DS)
The piston rod of the hydraulic top link has a pressu-
rised pressure chamber. The gas enclosed within it
acts as a shock absorber.
CONTENTS
Figures
1. Scope of supply
2. Safety regulations
2.1 General safety regulations
2.2 Additional safety regulations for the
hydraulic top link with shock absorber
2.3 Additional function "hydraulic float setting"
for the hydraulic top link with shock
absorber (DS)
3. Installation
4. Operation
5. Maintenance notes
5.1 General service notes
5.2 Special maintenance notes for the
hydraulic top link with shock absorber
6. Troubleshooting
All rights reserved. Reproduction, even in part, and
translation are not permitted without the written
consent of Walterscheid GmbH. All rights under
copyright law are expressly reserved by
Walterscheid GmbH.
We reserve the right to make technical changes in
line with progress.
10
Page 2/3/4
Page 11
Page 12
Page 12
Page 12
Page 13
Page 14