SCHOLTES LTE S3 XL60HZ Instructions Pour L'installation page 19

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

With fixed supports
Fig. 4-07
Loading the lower rack (see fig. 4-8)
Carefully load fl at plates, soup plates, dessert and
serving dishes, positioning them vertically. Pots, pans
and their covers must be loaded upside down.
When loading soup plates and dessert bowls, be sure to
leave a gap between them.
Loading examples:
1/2 load (certain models only)
Fig. 4-8
4.3.2 Cutlery basket (see fig. 4-9/4-10
depending on models)
The cutlery basket can be removed to simplify unloading.
Arrange the cutlery in an orderly manner inside the
basket, with the handles pointing downwards and
taking care not to injure yourself with the knife blades.
The basket is suitable for all types of cutlery, except those
long enough to interfere with the upper spray arm.
Place long items (ladles, wooden spoons and cooking
knives) that may interfere with the spray arm in the upper
rack making sure that knife tips do not protrude.
The dishwasher is complete with two cutlery baskets,
which means that one of them can be removed, freeing
space in the bottom rack, if there is not much cutlery to
be washed, or if a ½ load program is being used (on
models with this function).
The baskets feature an exclusive system of independent
sliding tip-up supports, offering a choice of combinations
to allow optimum use of the space available.
With tip-up supports
Vertical inserts Movement required
to extract the inserts
Fig. 4-9
The cutlery supports and central lid are in the bag of
accessories. The central lid (ref. A fig. 4-10) is intended
to act only as a cover; do not place the cutlery in it.
Fig. 4-10
4.3.3 Upper rack (see fig. 4-11)
It is recommended to load the upper rack with small- or
medium-sized items such as glasses, small plates, tea or
coffee cups, shallow bowls and light objects made from
heat resistant plastic.
If the upper rack is used in the lowermost position, it can
also be loaded with serving dishes, provided they are
only slightly soiled. The top rack is fitted, on the left, with
two plastic racks which can be raised to make room for
tall glasses, such as stem glasses.
Fig. 4-11
Horizontal
Horizontal
insert
insert
closed
open
19
EN

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Lfd s3 xl60hz

Table des Matières