D-Link AirPremier N DAP-3690 Guide D'installation page 6

Outdoor PoE Access Point to Your Network
Hardware Installation Overview
Step 4
DATA IN
Step 1: Complete Physical Installation first.
Step 2: Connect the Ethernet (connected to the DAP-3690 in Step 1 on page 4) to
the P+ DATA OUT port on the PoE based unit.
Step 3: Connect an Ethernet cable from a router/switch or PC to the DATA IN port
on the PoE base unit.
Step 4: Attach the power adapter to the connector labeled POWER IN on the PoE
base unit. Attach the power cord to the power adapter and into an electrical
outlet.
Step 5: For Console Cable requirement, please complete "Physical Install: Console
Cable" on page 5 and connect console cable to your Laptop or PC.
6
Connecting the DAP-3690
P+DATA OUT
Step 2
Step 3
DAP-3690
LAN (PoE)
Router or Switch
(Straight Through Cable)
D-Link DAP-3690 Quick Install Guide
Step 5
Computer
(Straight Through Cable)