Names And Function Of Controls On Remote - Nordmende 20 TFT LCD Mode D'emploi

3.

NAMES AND FUNCTION OF CONTROLS ON REMOTE

POWER
Turns TV ON from STANDBY or from ON to STANDBY
DIRECT DIGIT NUMBER SELECTION Keys ( 0 to 9 )
Selects program number 1 - 200 directly by using direct digit keys
- To select 1 digit program number press desired program number & wait for few seconds
selected program number will appears on screen.
- To select 2 digit or 3 digit program number press 1st,2nd or 3rd digit within 2 sec. After pressing
1 & 2 digit respectively.
PROGRAM UP / DOWN
Navigates up through the valid channels.
Navigates vertically up through the Menu / sub menu.
Used to set the time and Channel name.
SOURCE SELECTION (TV / AV)
Display OSD for source selection.
The input source can be selected with [CH+] / [CH-] keys & press on [VOL+] / [VOL-]keys on
remote
or on TV set as follows:
DISPLAY
Displays present source in formation with details of input signal co nnected.
PICTURE PRESET (
Recall presetted picture settings. Personal, Standard, Bright, Soft can be set.
QUICK VIEW ( Q.V )
Selectes to previously viewed channel.
I / II
I/II is the key for selection of mono, stereo, Dual I, Dual II if input signal is NICAM signal.
RED, GREEN, BLUE, YELLOW
The RED, GREEN, YELLOW & CYAN keys are used for quick access to colour coded pages
transmitted by FAST TEXT broadcast.
SOUND PRESET (
S
Recalls presetted sound settings. Personal, Standard, Music, Hall can be set
MENU
Selected MENU OSD window.
Exit from MENU OSD window when menu window is displayed on screen.
GB
(CH+ / CH-)
TV AV S-VIDEO SCART YPbPr/ YCbCr VGA
| P | )
| S | )
21