Cooking Zones - Fisher&Paykel OR24SDPWSX Guide D'utilisation

how to use the vitroceramic hob
VITROCERAMIC HOB
The ceramic surface of the hob allows a fast transmission of heat in the vertical direc-
tion, from the heating elements underneath the ceramic glass to the pans set on it.
The heat does not spread in a horizontal direction, so that the glass stays "cool" at only
a few centimeters from the cooking plate.
The 4 cooking zones are shown by painted disks on the ceramic surface.
IMPORTANT NOTE:
The heating elements incorporate a thermolimiter that switches the element ON/OFF
during all settings to protect the ceramic glass from overheating.
The use of incorrect pans and/or wrong pan positioning will cause the temperature
limiter to operate more frequently, resulting in a reduction of cooking performance.

COOKING ZONES

Incorporating the heating element (fig. 2.2a or 2.2b) you can control and light up by
selecting from the 12 positions on the control knob (fig. 2.1).
The heat intensity can be regulated continuously from "OFF" to "12" (max).
VERY IMPORTANT: TO SWITCH ON, ALWAYS LIGHTLY PRESS THE CONTROL
KNOB THEN TURN IT.
Check that the hob is clean and then switch on by press and turning the control knob.
Important:
DURING THE SELF-CLEANING CYCLE THE VITROCERAMIC HOB COOKING
ZONES DO NOT OPERATE.
If during self-cleaning cycle a cooking zone control knob has been turned ON
return the knob to the OFF position. Otherwise at the end of the self-cleaning
cycle and after having turned the oven selector control knob to the OFF posi-
tion, the cooking zone will operate.
DOUBLE COOKING ZONE
Incorporating 2 heating elements you can control and light up together or separately by
turning left or right the 6 positions control knob (fig. 2.3).
The heat intensity can be regulated continuously from "1" to "6" (max).
VERY IMPORTANT: TO SWITCH ON, ALWAYS LIGHTLY PRESS THE CONTROL
KNOB THEN TURN IT.
SWITCH ON THE SMALL CENTRAL ZONE (fig. 2.5)
Press and turn in anticlockwise direction the control knob from "1" to "6" (max).
SWITCH ON THE ALL ZONE (fig. 2.4)
Press and turn in clockwise direction the control knob from "1" to "6" (max).
REAR LEFT ZONE
2 heating element ON
fig. 2.4
(Rear left zone)
OFF
FRONT LEFT AND REAR RIGHT ZONE
FRONT RIGHT ZONE
Fig. 2.3
REAR LEFT ZONE
Central heating element ON
2
OFF
0
Fig. 2.1
fig. 2.2a
fig. 2.2b
fig. 2.5
7