Vortice NORDIK HVLS SUPER BLADE E Notice D'emploi Et D'entretien page 65

Masquer les pouces Voir aussi pour NORDIK HVLS SUPER BLADE E:
Table des Matières

Publicité

Schéma de câblage du système existant
Linea dedicata protetta opportunemente con Interruttore
magneto-termico e Differenziale di Classe A con sensibilità
di almeno 300 mA.
La linea deve essere presa a valle dell'interruttore generale
dell'impianto ed essere indipendente dalla altre linee che
alimentano i carichi già esistenti.
L'impiantista valutetà se tenere o eliminare il differenziale
a monte della distribuzione dei carichi.
Esso potrebbe creare problemi nel caso in cui la corrente di
dispersione verso terra è di valore consistente.
Ogni Destratificatore ha una corrente di dispersione di 2 mA.
Dedicated line suitably protected with Magnetic-Thermical Switch
and Differential Class A with a sensitivity of 300 mA.
The line must be taken downstream of the main switch of the
system and be independent of other lines that feed the existing loads.
The operator will consider whether to keep or eliminate
the Differential upstream of the load distribution.
It could create problems in the case where the leakage
current to ground is substantial value.
Each Destratifier has a leakage current of 2 mA.
LINEA ALIMENTAZIONE 85-264V MONOFASE 50-60 Hz
SUPPLY LINE 200-480V THREE-PHASE 50/60 Hz
SUPPLY LINE 85-264V SINGLE PHASE 50-60 Hz
USER LINE 1
MAIN SWITCH
Differential type A
USER LINE 2
65

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Nordik hvls super blade 110 v

Table des Matières