Safety Instructions - Kemot URZ3424 PROsinus-500S Mode D'emploi

Before use, read this instruction manual carefully and keep it for future reference.
Producer does not claim responsibility for damages caused by inappropriate handling
and use of the product.

SAFETY INSTRUCTIONS

• KEMOT PROsinus emergency power supply is designed for household and office
use. Do not use this device with specialized equipment or apparatuses (e.g.
industrial, medial equipment).
• Do not overload device. Operating this device with load higher than nominal may
lead to damaging this device.
• Note: Device may work on overload for a short period of time.
• Do not disassemble this device nor open the housing. High voltage might be still
present on the inside elements of the device, even after it has been switched off.
• Do not use this device if it is not working properly. In such case, turn the device off
immediately, disconnect it from power supply mains and switch the Battery switch
to OFF.
• Any repair can be carried out in an authorized service point exclusively.
• In case of fire, use only dry powder extinguisher. Using water or other types of fire
extinguishers can lead to electrocution.
• Position the device vertically, in a properly ventilated place with suitable temperature.
Warning: do NOT cover cooling fan of the device; it may lead to overheat.
• Protect this device from water, humidity as well as sources of heat and direct sunlight.
• Before use, make sure the device is properly grounded.
• Power supply socket should be easily accessible and located near the appliance.
• Warning: Inappropriate use of the device may lead to fire or electrocution.
To estimate operation time in case of power-cut, when the external device is supplied
with built-in battery of this emergency power supply device, refer to formula below:
100 W of load = → 10 A current consumption from the battery
Example: having in mind that built-in battery capacity of the URZ3424 is 55 Ah, then with
100 W load estimated operation time is around 55 Ah/10 A≈ (around) 5,5 h.
FEATURES
• KEMOT inverter with pure sine wave serves as an emergency power supply device
for equipments such as: central heating furnace, TV, refrigerator, induction stove,
electric fans, etc.
• Wide range of input voltage, high degree of output voltage accuracy, automatic
voltage regulation.
• Build in protection from overload, short circuit, overvoltage, undervoltage, overheat.
• LED display with current state indicators.
Owner's manual
EN
15