Advanced Menu Controls - DeVilbiss IntelliPAP DV53 STANDARD PLUS CPAP Série Mode D'emploi

aDVanceD Menu cOntrOlS

With the device on, press the "Next" or "Previous" buttons on the keypad to scroll through the items on the display.
Name
PREVIOUS ITEM
NEXT ITEM
SETTING CHANGE
Please note that the values displayed are examples only.
Patient Menu layout
The following charts show by Mode each Display you will scroll through using the Next or Previous buttons on the keypad.
Pressing the Down key at the Enable Menu Display will allow you to enter this submenu - then use Next or Previous
buttons to scroll through it; press the Up button to return to main menu. Once the final Display is reached, pressing the
Next button will return you to the first Display.
NOTE-If the unlocked symbol is shown, you are
able to adjust this setting. If the locked symbol
is shown, this setting can only be adjusted by
your provider.
NOTE: There are 5 levels of SmartCode data. Use
UP  or DOWN  key to change between levels.
Symbol Function
k
Pressing this button displays the previous menu option.
j
Pressing this button displays the next menu option.
h�
These buttons allow you to adjust the setting that is shown on the display.
i
CPAP Mode
P:10.0 FLX CPAP
Set Pressure
10.0 cmH2O
Delay Time
20 minutes
Delay Pressure
4.0 cmH2O
Tubing Length
1.8 m (6 ft)
SmartFlex Menu
Press 
Enable Menu
Press 
LCD Contrast Adj
50 %
Compliance Meter
123456.7 hours
Firmware Version
V0.21 18/05/2010
Serial Number
HD000005
Adherence Score
83% (25/30)
SmartCode
Heat:Off


1-Day
F6CD-37F-357R
Heater setting shown if DV5HH is
attached, FLX shown if SmartFlex
feature is turned on.
SmartFlex

3
SmartFlex Mode 
Full Time
SmartFlex IRnd 
3
SmartFlex ERnd 
3
Exit Menu
Press 
UP () BUTTON
DOWN () BUTTON
Auto-OFF

Disabled
Auto-ON

Disabled
Mask Fit Check
Enabled
Low Backlight
Enabled
Exit Menu
Press 
en - 17