Possible Malfunctions - Bartscher 700272 LN Mode D'emploi

7. Possible Malfunctions

Problem
The device is
connected to the
power supply but
is not working
Insufficient
cooling efficiency
Noise emitted by
the device
increases
- 42 -
Cause
• The plug is incorrectly
connected to the socket.
• Damaged fuse
• Power supply failure
• Direct sunlight or heat
sources in the vicinity of the
device
• Poor air circulation around
the device
• The door is not closed com-
pletely or opened too long
• Damaged or deformed
door seal
• Too little distances
between the stored
bottles or too many
bottles in the refrigerator
• Incorrect temperature
control setting
• The refrigerator is not
placed on the even surface
• The refrigerator touches
walls or other objects
• The bottles in the refrigerator
contact each other
Solution
• Connect the plug correctly
• Check the power supply
• Check the power supply
• Move the device from
the heat sources
• Assure sufficient distances
to the walls / other objects
• Close the door, minimize
the opening time
• Contact a sales agent
• Maintain sufficient
distances between the
bottles, remove excess
of bottles
• Set the temperature
control correctly
• Place the refrigerator
on the even surface
• Assure sufficient distances
to the walls / other objects
• Assure sufficient distances
between the bottles