Functional Description; Intended Use; Product Features - Bosch PSB 14,4 V-i Notice Originale

16 | English
Hold power tool by the insulated gripping
surfaces, when performing an operation
where the cutting tool may run into hidden
wiring. Contact with a "live" wire will make
exposed metal parts of the tool "live" and
shock the operator.
When working with the machine, always
hold it firmly with both hands and provide
for a secure stance. The power tool is guided
more secure with both hands.
Secure the workpiece. A workpiece clamped
with clamping devices or in a vice is held more
secure than by hand.
Do not work materials containing asbestos.
Asbestos is considered carcinogenic.
Take protective measures when dust can de-
velop during working that is harmful to one's
health, combustible or explosive. Example:
Some dusts are regarded as carcinogenic.
Wear a dust mask and work with dust/chip ex-
traction when connectable.
Keep your workplace clean. Blends of mate-
rials are particularly dangerous. Dust from
light alloys can burn or explode.
Always wait until the machine has come to a
complete stop before placing it down. The
tool insert can jam and lead to loss of control
over the power tool.
Avoid unintentional switching on. Ensure the
On/Off switch is in the off position before in-
serting battery pack. Carrying the power tool
with your finger on the On/Off switch or in-
serting the battery pack into power tools that
have the switch on invites accidents.
Do not open the battery. Danger of short-
circuiting.
Protect the battery against heat, e. g.,
also against continuous sun irradiation
and fire. There is danger of explosion.
1 609 929 M27 | (7.8.07)

Functional Description

Read all safety warnings and all in-
structions.
warnings and instructions may result
in electric shock, fire and/or serious
injury.

Intended Use

The machine is intended for impact drilling in
brick, concrete and stone as well as for drilling in
wood, metal and plastic. Machines with electron-
ic control and right/left rotation are also suitable
for screwdriving and thread-cutting.

Product Features

The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Keyless chuck
2 Front sleeve
3 Rear sleeve
4 "Drilling/Impact Drilling" selector switch
5 Rotation direction indicator
6 Rotational direction switch
7 On/Off switch
8 Battery
9 Battery unlocking button
10 Button for depth stop adjustment
11 Wing bolt for adjustment of auxiliary handle
12 Auxiliary handle
13 Depth stop
14 Screwdriver bit*
15 Universal bit holder*
*The accessories illustrated or described are not in-
cluded as standard delivery.
Failure to follow the
Bosch Power Tools