Ecolab Versatronic Notice D'utilisation page 93

Device menu
Tap the field next to 'ID input' to show the selection of
various user levels:
After selecting the corresponding user level, the menu
window with the field 'ID input' appears again. Press
the [OK] button to switch to the 'Password input' :
After entering the password and pressing the 'Enter'
button, the log-in process is complete and the logged-
on user level is displayed on the start screen.
If over a certain period of time (factory setting: 300 s) no key is pressed, an
automatic log-out occurs.
10.1.2 Log-off
By pressing the 'Logoff' button (see figure, item 2
reset.
10.2 Select calibration
To ensure the measuring accuracy, we strongly recommend to perform the
calibration.
See operating instructions 417102269, chapter 'calibration' .
417102279 Rev. 2-08.2020
Ä on page 41 the respective log-on is
42
Fig.: Selection of user levels
Fig.: Password input
Fig.: Display of the user level