Using The Product; Performing Settings - TESTO 477 Mode D'emploi

Terminal diagram
Pos: 29 /TD/Überschriften/6. Produkt verwenden @ 0\mod_1173774928554_79.doc @ 328 @ 1
6

Using the product

Pos: 30 /TD/Überschriften/6.1 Einstellungen vornehmen @ 0\mod_1184584321421_79.doc @ 1863 @ 2
6.1.

Performing settings

Pos: 31 /TD/Produkt verwenden/testo 477/Einstellungen vornehmen @ 4\mod_1249460650835_79.doc @ 47183 @ 3333
✓ The instrument is switched on.
1. Press [M].
> Setting option (e.g. Hz) is shown (for settings, see following
section Setting options).
2. Set values with
- Instrument changes to the next setting option.
3. Repeat steps 1-2 until the desired settings are performed.
4. Press
- Instrument returns to Measuring Mode.
The instrument must be manually switched between the
external and internal trigger signal, see Internal/external
trigger signal (page 37).
[ ],  [
A parameter set differently than the factory setting flashes
during operation.
[ ].
–
], [ ] or [ ] and confirm entry with [M].
6 Using the product
35