General Instructions - gdw 1638 Manuel D'instructions

Masquer les pouces Voir aussi pour 1638:
Table des Matières

Publicité

Dacia Logan MCV (Break)
01/2007 - ....
Ref. 1638

GENERAL INSTRUCTIONS:

Fitting :
-
Make sure that the tow bar has not been damage during transport and it is the right reference
for the vehicle.
-
Read the fitting instruction before starting and follow them very precisely during the fitting.
-
Present the tow bar under the car first to check if all points are right.
-
If holes have to be drilled, check that no wires can be damaged, remove all soundproofing
material, clean and protect the drilled holes with an anticorrosive product.
-
If the vehicle is equipped with special bumpers (sport or tuning parts...) first contact the
technical service of GDW to be sure that the tow bar can be fitted.
Guarantee :
-
The indicated towing weight, "D" and "S" values may not be exceeded
-
The tow bar has to be checked after 1.000 km and every year :
o All bolts should be checked and retightened if necessary
o Repair any damage to the paint finish
o Replace any damaged components
o Parts of the detachable tow bars must be kept well greased.
Use :
-
If the towing ball covers the number plate or the fog light, it must always be removed
when no trailer is used.
WICHTIGE RATSCHLÄGE :
Montage :
-
Vor Anfang von Montage muss Anhängerkupplung auf Transportschade kontroliert werden.
-
Aufmerksam Anbauanleitung zu Rate siehen. Alle Anweisungen sollen gefolgt werden.
-
Erst Anhängerkupplung auf Fahrzeug präsentieren, danach montieren.
-
Vor dem Bohren von Löcher, nachprüfen ob anwesende Kabels nicht beschädigt werden
können. Dröhnenschutz und Unterbodenschutz entfernen. Gebohrde Löcher und
Karrosserieunterteilen mit eine Korrosionfeste Farbe behändeln.
-
Falls Fahrzeug keine Standardstoßstangen hat (spezielle Serie, Sportausführungen, Tuning
...), muß Aussparung nachprüfen. Im Zweifelsfall, GDW kontaktieren.
Garantie :
-
Die angegeben max. Anhängelast, "D" en "S" Wert, möchten nicht hinüberschritten werden.
-
Nach 1.000 Km gebrauch und weinigstens 1 Mahl pro jahr muss Anhängerkupplung
nachgeprüft werden :
o Alle Bolzenverbindungen nachprüfen und nachziehen falls nötig.
o Beschädigung an Farbe wiederherstellen.
o Falls Anhängerkupplung durch eine Extreme Belastung getrefft werd muss diese
ersetzt werden.
o Die Interne Teile von abnehmbar System einfetten.
Gebrauch :
-
Falls Kugel von Anhängerkupplung Kennzeichen oder Nebelscheinwerfer ganz oder
zum Teil bedeckt muß diese, wann nicht gebraucht, entfernt werden.
MUST BE KEPT IN THE VEHICLE
IN FAHRZEUG BEWAHREN

Publicité

Table des Matières
loading

Table des Matières