LG ESS Home 8 Manuel D'installation page 49

Settings 49
Wireless Network setting
When the [Connection Type] option in the
[Connection Status] is set to [Wireless]. Wireless
connection options are displayed.
Tab [SSID] filed to display the SSID list. Select the
SSID which your ESS is connected and then tap
[CONFIRM].
Select the encryption type on the [Encryption]
option. And then input password of the SSID in the
[Password] field.
After entering the all the fields, tab [Connect] to
finish the wireless network connection.
3
If the connection is succesful, [Internet Connected]
is displayed on the screen.
If [IP Setting] option in [Wireless Setting] tab is
set to [Auto], this product will be automatically
allocated an IP address from local area network
(LAN) via wireless connection. You may need to
set network connection manually depending on
the network conditions. In this case, tap [Auto] to
change to [Manual].
If you set the [IP Setting] option to [Manual], fill in
[IP address], [Subnet Mask], [Gateway] and [DNS]
options manually.