Acqua Brevetti BravoMAX A FT050 Usage Et Entretien page 23

A1.5 BRAVOMAX A operation
Usually the filters that are available for sale restrict themselves to remove exclusively the dirt accumulated in the bowl
without cleaning the cartridge but BravoMAX A, thanks to its brushing + discharge system, guarantees an efficient and
thorough cleaning of the filtering cartridge too. BRAVOMAX A fully automatic cleaning takes place according to the
cartridge soiling level and according to a preset time interval.
A1.6 BRAVOMAX A performances and technical datasheet
BravoMAX A short washing override interval
Connections
Flow rate (DP=0,2 bar)
Flow rate (DP=0,5 bar)
Filtration rating*
Adjustable Interval timer
Min-max water pressure
Min-max water temperature
Power supply
BravoMAX A long washing override interval
Connections
Flow rate (DP=0,2 bar)
Flow rate (DP=0,5 bar)
Filtration rating*
Adjustable interval timer
Min-max water pressure
Min-max water temperature
Power supply
*Other filtration rating are available upon request (100 mm or 200 mm).
A1.7 Specification for water to be treated
BravoMAX A has been designed and created for the treatment of drinking water.
If the water to be treated is not potable, process water and/or cooling water please refer to Acqua Brevetti SRL (tel.
+39.(0)49.8973432, e-mail: info@acquabrevetti.it).
BravoMAX A cannot be used to filter water containing any kind of chemicals (for example acids, bases, solvents,
detergents, antifreeze, glycols etc.).
A1.8 Precaution for use
Warning! BravoMAX A filter is a device connected to the electricity supply at a voltage of 220 Volt.
The adaptor must be plugged into a standard socket equipped with a grounding pin plug and protected by a
residual current operated circuit-breaker. Make sure the adaptor is securely plugged into the socket and
BravoMAX A - ENGLISH
FT050
Unit
FT150
1"½
DN40
3
m /h 18.0
3
m /h 30.0
micron
hours
bar
°C
V-Hz-VA
FT060
Unit
FT160
1"½
DN40
3
m /h 18.0
3
m /h 30.0
micron
hours
bar
°C
V-Hz-VA
MAN136 PAG.E-5
FT052 FT054
FT152 FT154
2" 2"½
DN50 DN65
22.4 35.0
40.0 49.6
150
2 – 4 – 6 – 8
1.5 - 10
5 – 30
230/18-50-10
FT062 FT064
FT162 FT164
2" 2"½
DN50 DN65
22.4 35.0
40.0 49.6
150
12 – 24 – 36 – 48
1.5 - 10
5 – 30
230/18-50-10
FT056
FT156
3"
DN80
40.0
54.0
FT066
FT166
3"
DN80
40.0
54.0