Setup; Step 1: Connect The Display To Your Computer - Sony SDM-M51 Mode D'emploi

Setup

Before using your monitor, check that the following accessories
are included in your carton:
• LCD display
• Power cord
• AC adapter
• HD15 (RGB) video signal cable (this cable is already
connected to the monitor)
• Audio cord (stereo miniplug)
• Cord clip (2)
• Macintosh adapter
• Windows Monitor Information/Windows Utility/Macintosh
Utility Disk
• Warranty card
• Notes for Macintosh users
• This instruction manual
Step 1: Connect the display to your
computer
Turn off the monitor and computer before connecting.
Note
Do not touch the pins of the video signal cable connector as this might
bend the pins.
x Connecting to an IBM PC/AT or compatible
computer
to VIDEO output
IBM PC/AT or
compatible computer
HD 15 (RGB) video
signal cable (supplied)
x Connecting to a Macintosh or compatible
computer
Use the supplied Macintosh adapter.
Macintosh adapter
(supplied)*
to video output
Macintosh or
compatible computer
* Refer to the supplied "Notes for Macintosh users" for further details.
HD15 (RGB) video
signal cable (supplied)
GB
(continued)
7