Description Of Display - VWR DO220 Manuel D'instructions

D e s c r i p t i o n o f D i s p l a y
1
2
3
Number
1 BAT: Low battery indicator.
2 Continuous or Manual sampling mode
indicator. When in Manual mode, manual will
blink until the measurement is stable.
3 CAL: Calibration mode indicator.
4 Data record indicator.
5 Temperature reading in Celsius.
6 mbar: Displays during calibration to prompt
user for true barometric pressure.
7 Main display for dissolved oxygen
measurements in either % or mg/L.
8 Save, Full, Recall, Each, All, Delete:
Instrument's data storage indicators.
9 SAL ppt: Displays during calibration when
user is prompted for the approximate salinity
(in ppt) of the sample to be tested.
10 CAP, K1, K2, K3, K4, K5, KC: Sensor cap coefficient
indicators when entering new sensor cap coefficients.
Figure 5
4
Description
5
10
5
9
8
7
6