Package Contents; Cabling And Setup; Setup; Connecting The Switch - Atlantis NetMaster G5P Mode D'emploi

 Flow control for any port. This minimizes dropped packets by sending out
collision signals when the port's receiving buffer is full. Note that flow control is
only available in half duplex mode.
 Data filtering rate eliminates all error packets, runts, etc., per port at wire-
speed for 1000Mbps speed.
 Green Function: This technology allows to reduce the power consumption up to
45%*.
 Jumbo Frames: The Jumbo Frame support enables the transfer of larger
packets than the Ethernet frame (1500bytes) without the need for fragmentation,
thus increasing the local network's transfer capacity. When correctly supported by
the devices connected to the switch, this function enables over 40% more data to
be transferred than traditional switches, thus guaranteeing a high-capacity
network also for applications for which bandwidth is particularly critical.

1.2 Package Contents

Unpack the package and check all the items carefully. Also, keep the box and
packing materials in case you need to ship the unit in the future. The package
should contain the following items:
 1 x NetMaster G5(8)P
 1 x External power supply (12V, 0,5A)
 1 x Multilanguage Manual
 1 x Warranty Card
If any item is found missing or damaged, please contact your local reseller for
replacement.

2. Cabling and setup

2.1 Setup

The setup of the Switch can be performed using the following steps:
 Make sure that there is proper heat dissipation from and adequate ventilation
around the Switch
 Do not place heavy objects on the Switch.
 Visually inspect the DC power jack and make sure that it is fully secured to the
power adapter.

2.2 Connecting the Switch

 Since the switch does not include a power switch, plugging its power adapter into
a power outlet will immediately power it on.
17