Maintenance And Cleaning; Additional Information - KaWe QM-1-025N Mode D'emploi

Maintenance and Cleaning:

Workstation: Remove surface impurities with a
disposable/paper towel.
Cleaning preparation: No special requirements.
Manual cleaning: The head piece and plastic hoses can
be wiped off with alcohol or a mild soap solution. The ear
tips are to be unscrewed and can be washed with soapy
water. The diaphragm membrane can be washed with
soap after the retaining ring has been removed.
Automatic cleaning: Automatic cleaning is not
possible.
Disinfection: Disinfecting solutions and cleaning agents
such as Meliseptol®/Meliseptol® rapid are to be used in
accordance with the manufacturer instructions. Please
heed the given reaction times!
Maintenance: Defective parts must be removed and/or
replaced.
Check and performance test: Check the diaphragm,
tubing and head piece for damage. The instrument must
be complete. Before use, the ear tips must be positioned
correctly. The position of the head piece is to be adjusted
by each user individually.
Packaging: Individual packaging: a standard
polyethylene bag can be used. The size of the bag must
correspond to the size of the instrument so that it closes
properly.
Sterilization: As the stethoscope is not intended for use
during operational procedures, regular cleaning
procedures are sufficient.
Limitation of reuse preparation:
Frequent reuse only minimally affects the instruments.
The working life of the instruments usually depends on
the wear and tear and damage by use.
Transport and Storage:
Storage and transport: In order to prevent
contamination of the instrument or contact with dust,
always store the stethoscope in its case.
Storage: Store the stethoscope in a dry place.
Disposal:
Dispose along with normal domestic waste.

Additional information:

Please always heed these instructions.
Common accessories:
Further information about this product can be found at
our internet shop at: www.kawemed.de.
Manufacturer:
Kirchner & Wilhelm GmbH & Co. KG
Eberhardstraße 56 | DE-71679 Asperg
Contact with the manufacturer:
Address or telephone number of the dealer or dial
+49 7141 68188-0.
Symbol key:
Manufacturer
Date of manufacture
LOT
Lot code
Heed the User's Manual
Caution!
Complies with relevant EU guidelines
9