Verifying The Operating Environment; Installation Procedure - Brother Innov-is Guide D'installation

Verifying the Operating Environment

Before starting the Certification Key Issuing Wizard,
check that the computer to be connected meets the
following operating conditions.
Computer IBM-PC or compatible computer
Operating System
Windows
XP or Vista
CD-ROM drive Required for installation
Others Internet connection available
and
one available USB port (required
to upgrade the sewing machine)
* IBM is a registered trademark of IBM Corporation in the United
States and other countries.
* Windows is a registered trademark of Microsoft Corporation in the
United States and other countries.
1
* Windows 98SE requires a driver. Download the driver from our
web site (www.brother.com). In addition, only Windows 98
Second Edition can use the driver.
® 1
98SE* , Me, 2000,

Installation Procedure

The following procedure describes how to upgrade
your sewing machine to version 4.0.
Note
• If the procedure described below is not fully
completed, your sewing machine cannot be
upgraded to version 4.0.
• Access to the Internet is required in order to obtain a
certification key.
a
Make a note of the 10-digit number (machine
number) displayed beside "NO." on P.3 of the
settings screen.
Note
Confirm the version is 3.0 or later. If the version is not
3.0 or later, contact your authorized dealer or Brother
Customer Service for version 3.0.
Memo
• Since this number will be entered when a
certification key is obtained, be sure to write it down
correctly.
Note
• The number that appears beside "NO." is different
from the serial number (SER. NO.) on the label
attached to the back of the sewing machine.
Machine
number (NO.)
Version
number
3