Cleaning The Device - Urmet 1092 Manuel D'utilisation

Option
BLACK LEVEL
GAMMA
BLUE GAIN
RED GAIN
Setting available for CRT monitor:
Option
BLACK LEVEL
BLUE GAIN
RED GAIN
LSC (Lens Shading Compensation)
Image improvement of the dark corner zones. This function performs an adjustment of the shading level on
image corners. To set the right level, point the camera to a completely white wall and press the Menu
button (ENTER)
VIDEO OUT
Video standard option: PAL or NTSC
COMET (only with CVBS video output)
The COMET (Composite Video Enhanced Technology) video mode enables.
Important note:
This must be used with the CVBS video output and any devices compatible with COMET video signal

CLEANING THE DEVICE


Rub delicately with a dry cloth to remove dust and dirt.

Dip the cloth in neutral detergent if dirt cannot be eliminated with a dry cloth alone.

Do not use volatile liquids (such as petrol, alcohol, solvents, etc.) or chemically treated clothes to
clean the device to prevent deformation, deterioration or scratches to the paint finish.
DS1092-350
Value
The value is already set up to a normal LCD operation.
0  60
Change the value only in specific video take conditions or
for using monitors that do not meet standards.
USER  1.00
Setting the Gamma value
Increase or reduce the saturation value to change the
0  100
color gain.
Increase or reduce the saturation value to change the
0  100
color gain.
Value
The value is already set up to a normal CRT operation.
0  60
Change the value only in specific video take conditions or
for using monitors that do not meet standards.
Increase or reduce the saturation value to change the
0  100
color gain.
Increase or reduce the saturation value to change the
0  100
color gain.
Description
Description
29