LG HX806PE Manuel D'utilisation page 16

16 Raccordements
Stand type
1. Insert a speaker wire from the bottom of the
base.
2. Draw the speaker cable through the inside at
2
the pole.
3. Attach the pole to the base, than fix the pole to
the base by rotating the screw.
4. Open the cover of the speaker.
5. Draw the speaker cable through the inside at
the speaker.
6. Attach the speaker to the pole, then secure the
connection with a supplied screw.
7. Connect the speaker wire to the terminal on the
speaker.
Make sure the wire marked black goes in to the
terminal marked "–" (minus) and the other wire
goes in to the terminal marked "+" (plus).
8. Close the cover to the speaker.
> ,
Attention
Be careful that the speaker
does not fall down.
Otherwise it may result in
the speaker malfunctioning
and causing personal injury
and/ or property damage.