Date & Time - Abus IPCB42500 Manuel Utilisateur Logiciel

7.5.5 Date & time
Time zone:
NTP:
Server address/NTP port:
NTP port:
Interval:
Manual:
Synchronisation with computer time: use the current PC time currently being used for access
Enable summer time (DST):
here, select the time zone in which the camera is located.
tick the box to synchronise the date and time of the camera with an
NTP time server.
enter the server address or the IP address for the NTP server
here. A standard server is already set up and can be adjusted if
required.
enter the NTP port here. The standard port for NTP is 123.
select an update interval.
manual setting of date and time. Click in the date/time field to open
a configuration menu.
(after saving the settings).
tick the box if there is generally a summer time/winter time
changeover at the camera location.
94