EIBENSTOCK EHR 15.2 SB Notice Originale page 16

Damages due to material defects or production faults shall be eliminated free
of charge by either repair or replacement.
Complaints will be accepted only if the tool was returned in non-dismantled
condition to the manufacturer or an authorized Eibenstock service centre.
Declaration of Conformity
We declare under our sole responsibility that the product described under
"Technical Data" is in conformity with all relevant provisions of the directives
2011/65/EU, 2014/30/EU, 2006/42/EC
including their amendments and complies with the following standards: EN
60745‚ EN 50581.
Technical file (2006/42/EC) at:
Elektrowerkzeuge GmbH Eibenstock
Auersbergstraße 10
D – 08309 Eibenstock
Lothar Lässig Frank Markert
General Manager Head of Engineering
19.06.2019
Subject to change without notice.
15