EIBENSTOCK EHR 15.2 SB Notice Originale page 15

Noise Emission
The indication of noise emission is measured according DIN 45 635, part 21.
The level of acoustic pressure on work site could exceed 85 dB (A); in this
case protection means must be used.
Wear ear protectors!
The typical hand-arm vibration is below 2.5 m/s².
Measured values determined according to EN 60 745.
Vibration emission value
Uncertainty
The declared vibration emission level represents the main applications of the
tool. However if the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission may differ. This may
significantly increase the exposure level over the total working period
An estimation of the level of exposure to vibration should also take into
account the times when the tool is switched off or when it is running but not
actually doing the job. This may significantly reduce the exposure level over
the total working period.
Identify additional safety measures to protect the operator from the effects of
vibration such as: maintain the tool and the accessories, keep the hands
warm, organisation of work patterns.
According to the general supply conditions for business dealings, suppliers
have to provide to companies a warranty period of 12 months for redhibitory
defects. (to be documented by invoice or delivery note)
Damage due to natural wear, overstressing or improper handling are
excluded from this warranty.
Only for EU countries
Do not dispose of electric tools together with household waste
material!
In observance of the European Directive 2012/19/EC on waste
electrical and electronic equipment and its implementation in
accordance with national law, electric tools that have reached
the end of their life must be collected separately and returned
to an environmentally compatible recycling facility.
a
K
Warranty
1,6 m/s
2
h
0,1 m/s
2
14