Oil Filling; Transmission Oil - Greencut GTC300X Manuel D'utilisation

DEPTH LIMITER ADJUSTMENT
To obtain best performance and a correct advance of the motor hoe, regulate the spur as indicated below (see figure
9):
a) Regulation for a hard terrain: loosen the screw (1) and lift the
spur so that the weight counteracts the weight of the motor
hoe.
b) Adjustment for soft floors: loosen the screw (1) and lower the
spur to move the weight of the motor hoe on the blades.

OIL FILLING

ATTENTION: Put the oil with the machine in a horizontal position, to know this, make sure that
the belt is in a straight line.
The product is NOT supplied with engine oil, although there may be residual oil from the factory. It is essential to add
proper engine oil to the engine type before use. Failure to add engine oil will void the product warranty.
Four-stroke engines require engine oil in the crankcase for lubrication of internal components. Severe or irreparable
damage can result if the engine is allowed to run without engine oil. The engine oil level requires regular maintenance.
Check the engine oil level and make sure the oil level is at or just below the maximum level indicator. Always check
the engine oil level before starting the engine.
ENGINE OIL
Type: 10W30 / 10W40 / 15W30 / 15W40
Quantity: 0.7L
NOTE: The motor is equipped with a level sensor. In case of insufficient level the sensor inhibits the
ignition, ceasing to produce spark in the spark plug.

TRANSMISSION OIL

Type: 80W90
Quantity:1L
77
EN