Assembly - Greencut GTC300X Manuel D'utilisation

• Remove the product and accessories from the box. Make sure all items are present.
• Inspect the product to ensure that it has not been broken or damaged in transit.
• Do not discard the packaging material until you have carefully inspected and satisfactorily used the product.
ATTENTION: If any part is missing or damaged, please contact the Official Technical Service. Do not
use this product without replacing the part. Using this product with damaged or missing parts can
cause serious injury to the operator.

ASSEMBLY

UNPACK THE BOX
1. Remove the cardboard packaging and disassemble the metal structure by removing the two fixing screws
located on the wheel axle and fastened to the cage.
2. Remove and check all components and accessories.
MOUNT BRACKET AND DEPTH LIMITER
1. Align the hoe, block the desired height with the pin and fix the pin.
2. Attach the hoe support to the tiller by inserting the pin and securing it with the pin.
1 2
2
71
EN