Safety Features; Care And Cleaning - Lorell LLR33568 Manuel Du Propriétaire

SAFETY FEATURES

The heater is equipped with an over-heat device which cause the unit to
stop operating in the event that the internal temperature exceeds the normal
operating temperature.
If the heater shuts down,
1. Turn off and unplug the heater.
2. Wait for at least 10 minutes until the heater cools.
3. Plug the heater in to the power outlet and then turn it on.
Note: This heater includes a safety tip-over protection feature, which will shut
the heater off in case it is tipped over. If, at any time, the heater does tip over,
please put the heater back in the upright position (wheels on bottom, controls
on top). The heater will resume its normal operation

CARE AND CLEANING

1. Always remove the plug from the power socket and allow heater to cool.
Wipe heater with a soft, damp cloth. Do not use detergents and abrasives.
2. If the heater is not in use over a certain length of time, wind the cable
around the holder and store it in a dry place.
3. In case of malfunction, do not try to repair the heater by yourself. It may
result in fire hazard or electric shock
SPECIFICATIONS
Voltage Frequency
120 V AC
This heater is designed for finite space heating or as a supplementary heating
source. It can not replace the main heat source during the winter.
LLR33568_Assembly_Instructions.indd 6
Wattage
60 Hz 1500 W
Max. Current BTU Output
12.5 A 5120
6
Coverage Area
(Reference Only)
162 sq. ft. (15m )
2
5/26/15 5:33 PM