Important Safety Information; Anti-Tip Device - Danby Designer DER244 Guide D'utilisation Et D'entretien

IMPORTANT SAFETY INFORMATION

READ ALL INSTRUCTIONS BEFORE USING

ANTI-TIP DEVICE

To reduce the risk of tipping the range, the range must be secured by a properly installed anti-tip bracket.
instructions for complete details before attempting to install.
For Freestanding Ranges:
To check if the bracket is installed and engaged properly, look underneath the range to see that the anti-tip arm attached
to the side panel is engaged in the bracket. On some models, the storage drawer or kick panel can be removed for easier
inspection. If visual inspection is not possible, slide the range forward, confi rm the anti-tip bracket is securely attached to
the fl oor or wall, and slide the range back so the anti-tip arm slides just under the anti-tip bracket. If the range is pulled
from the wall for any reason, always repeat this procedure to verify the range is properly secured by the anti-tip bracket.
READ AND FOLLOW THIS SAFETY INFORMATION CAREFULLY
A child or adult can tip the range and be killed. Verify the anti-tip bracket has been
properly installed and engaged to the fl oor or wall. Ensure the anti-tip bracket is re-
engaged when the range is moved by sliding the anti-tip arm just under the bracket.
Do not operate the range without the anti-tip bracket in place and engaged. Failure
to follow these instructions can result in death or serious burns to children or
adults.
Anti-Tip
Bracket
Free-Standing Ranges
SAVE THESE INSTRUCTIONS
WARNING
Tip-Over Hazard
Right side
panel
Rear wall
2
See installation