KENMORE ELITE MICROCLEAN 665.1482 Série Guide D'utilisation Et D'entretien page 17

Options
Hi Temp Wash
Raises main wash temperature to improve
cleaning for loads containing tough,
baked-on food.
Sani Rinse
Sanitizes dishes and glassware in accordance
with NSF International NSF/ANSI Standard
184 for Residential Dishwashers. Certified
residential dishwashers are not intended for
licensed food establishments. Only sanitizing
cycles have been designed to meet the
requirements of the NSF/ANSI 184
performance standard for soil removal and
for sanitization efficacy. There is no intention,
either directly or indirectly, that all cycles on
a NSF/ANSI 184 certified dishwasher meet
the NSF/ANSI 184 performance standard for
soil removal and for sanitization efficacy.
The Sani Rinse indicator indicates at the end
of the cycle whether the Sani Rinse option
was successfully completed. If the indicator
does not activate, it is probably due to the
cycle being interrupted.
Smart Dry™
Turns the heat element on at the end of the
wash cycle. Use rinse aid with or without the
Smart Dry™ option for best drying results.
Plastic items are less likely to deform when
loaded in the top dish rack.
Smart Dry™ Plus
Smart Dry™ Plus is used with Smart Dry™ to
extend the heated drying time. For the very
best drying performance, use rinse aid and
the Smart Dry™ Plus option.
Top Rack Only
For added convenience, use for washing a
small load of dishes in the top rack to help
keep the kitchen continuously clean.
Bottom Rack Only
For added convenience, use for washing a
small load of dishes in the bottom rack to
help keep the kitchen continuously clean.
**The maximum additional water used for any combination of options is 2.6 gal. (9.8 L).
Can be
selected with
H E
SmartWash Raises the main wash
®
Pots & Pans temperature from 120°F
Normal Wash (49°C) to 140°F (60°C).
H E
SmartWash
®
Increases the main wash
Pots & Pans
temperature from 120°F
Normal Wash
(49°C) to 140°F (60°C) and
Top Rack Only
the final rinse from 140°F
(60°C) to 155°F (68°C).
Bottom Rack Only
Turns the heat element on at
the end of the wash cycle.
NOTE: Each time you press
the SMART DRY PLUS button
it toggles between the Smart
Dry™, Smart Dry™ Plus, and
the Air Dry options.
Smart Dry™ is selected when
the light under the SMART
Available with
DRY PLUS button is lit.
any cycle except
Smart Dry™ Plus is selected
Quick Rinse
when both lights, above and
below the SMART DRY PLUS
button, are lit.
Air Dry is selected when both
lights are not lit.
The Smart Dry™ Plus option
must be selected for any cycle
and will momentarily flash for
cycles that do not allow it.
Slightly faster wash for
Available with
smaller loads
any cycle
Cannot be used with
TurboZone option
®
Available with
any cycle
Slightly faster wash for
smaller loads
Cannot be used with
TurboZone option
®
Added time
What it does
to cycle
0:00 to 0:30
0:10 to 2:00
0:11 to 0:48
0:42 to 1:20
Saves up to
Saves up to
Added
Water**
Gallons
(Liters)
0 to 2.6
(0 to 9.8)
0 to 2.6
(0 to 9.8)
0
0:07
0
0:24
0
17