Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
OBJ_BUCH-2486-003.book Page 11 Wednesday, January 20, 2016 1:01 PM
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with another.
It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This may
significantly increase the exposure level over the total working
period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may signif-
icantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
Mounting and Operation
Action
Inserting the Saw Blade
Removing the Saw Blade
Adapting the position of the guide
roller
Mounting the splinter guard
Mounting and use of "Cut Control"
Connecting the dust extraction
Adjusting the Cutting Angle
Switching on the sawdust blower
device
Switching On and Off
Guide the power tool toward the work-
piece only when switched on
Plunge Cutting
Lubrication when cutting metal
Selecting Accessories
Maintenance and Cleaning
For safe and proper working, always keep the machine
and the ventilation slots as well as the tool holder
clean.
Clean the saw blade holder regularly. For this, remove the saw
blade from the machine and lightly tap out the machine on a
level surface.
Check the guide roller regularly. If worn, it must be replaced
through an authorised Bosch after-sales service agent.
Lubricate the guide roller occasionally with a drop of oil (see
figure 14, page 147).
If the replacement of the supply cord is necessary, this has to
be done by Bosch or an authorized Bosch service agent in or-
der to avoid a safety hazard.
Bosch Power Tools
After-sales Service and Application
Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-pt.com
Bosch's application service team will gladly answer questions
concerning our products and their accessories.
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the nameplate of
the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
Figure
Page
UB 9 5HJ
1
142
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
2
142
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
3
142
4
143
Ireland
5
143
Origo Ltd.
Unit 23 Magna Drive
6
144
Magna Business Park
7
144–145
City West
Dublin 24
8
145
Tel. Service: (01) 4666700
9
146
Fax: (01) 4666888
Australia, New Zealand and Pacific Islands
10
146
Robert Bosch Australia Pty. Ltd.
11
147
Power Tools
12
147
Locked Bag 66
–
149–150
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch.com.au
English | 11
1 609 92A 1PR | (20.1.16)
Publicité
Table des Matières
