Stop Mode - LENCO SCD-6800 Mode D'emploi

 Stop mode
1. If Stop button (10) is pressed during play or pause mode. Go to stop mode and display total number of track on the LCD
display (8).
 Skip mode (skip up
1. During play mode, if skip up
2. During play mode, if Skip down
3. After step 2, press skip down
 For MP3 disc/file
1. Place the MP3‐CD to CD compartment. After focus search is performing, the total number of track will be shown on the LCD
display (8).
2. Press Skip up or Skip down
3. When the desired track and album is being selected, press the "Play/Pause
Remark
-
Press "Folder up " button (20) on main unit can select the MP3 folder upward directly.
-
The track number will display on LCD (8) and then it will play to the number of the track when press Play/Pause
(18).
 Repeat/Random mode
Press the "Play mode" button (21) during playback to select repeat and random function, a single track, single folder (MP3 only)
or all the tracks can be played in difference mode as follow:‐
For CD
(2)
(1) Repeat 1
Play mode
Repeat track
Repeat all
Random
Off mode
For MP3 disc/file
(1) Repeat 1 (2)
Play mode
Repeat single track
Repeat single folder
Repeat all tracks
Random
Off mode

Repeat play
You can listen the desired tracks or folder repeatedly by this function.

Random play
You can listen all the tracks in a random order by this function
CD/MP3 disc programming
Up to 20 tacks can be programmed for disc play in any order. Before use, be sure to press the stop button.
1. Set in CD mode.
2. Press the Memory button (12), "P01& T000" will appear on LCD display (8).
3. Select a desired track by using the Skip up
4. Press the Memory button (12) to enter the track into the memory.
5. Repeat steps 3 and 4 to enter additional tracks into the memory if necessary.
6. When all the desired tracks have been programmed, press "Play/Pause
have programmed.
7. Press "Stop " button (10) to terminate program play.
Version: 1.0
/skip down )
button (19) is pressed it will go to next track and display the track no.
button (11) is pressed, it will go back to the beginning of the track, same track no.
button (11) again, it will go to the previous track and play beginning of the track.
(11/19) button to select the track number.
Repeat all track
Indicator
on LCD display
Rep 1
Rep A
Rand
‐‐‐‐‐‐‐‐‐‐‐‐‐
Repeat 1 folder (3)
Indicator
on LCD display
Rep 1
Rep F
Rep A
Rand
‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐
/Skip down
" button (18) to start playback.
(3) Random (4)
Repeat all tracks (4)
buttons (19/11).
" button (18) to play the disc in the order you
9
Off mode
Random (5) Off mode
button