English; Connecting To The Mains - Bosch AQT 42-13 Notice Originale

12 | English

Nur für EU-Länder:
Gemäß der Europäischen Richtlinie 2012/19/EU über Elek-
tro- und Elektronik- Altgeräte und ihrer Umsetzung in natio-
nales Recht müssen nicht mehr gebrauchsfähige Produkte
getrennt gesammelt und einer umweltgerechten Wiederver-
wertung zugeführt werden.
English
Safety Notes
Explanation of symbols
General hazard safety alert.
Never direct the water jet at
people, animals, the machine
or electric components.
Warning: High pressure jets can be
dangerous if subject to misuse.
According to the applicable
regulations, the appliance
must never be used on the
drinking water network without a
system separator. Use a separator
as per IEC 61770 Type BA.
Water flowing though a system sep-
arator is considered not drinkable.
The AQT 42-13 is intended
for use only in premises hav-
≥100 A
ing a service current capacity
≥100 A per phase, supplied from a
distribution network having a nominal
voltage of 230 V. If in doubt please
contact your Supply Authority.
F 016 L81 843 | (15.02.2019)
Safety Notes for pressure washer
Read all safety warnings
and all instructions. Failure
to follow the safety warnings
and instructions may result in electric
shock, fire and/or serious injury.
The warning and information signs
attached to the unit provide import-
ant information for safe operation.
Apart from the information in the
operating instructions comply with
the general safety regulations and
regulations for the prevention of ac-
cidents.

Connecting to the mains

The voltage of the power source
u
must correspond with the data on
the type plate of the product.
We recommend that this product is
u
only connected into a socket which
is protected by a circuit-breaker that
would be actuated by a 30 mA resid-
ual current.
The circuit breaker supplying mains
u
power to the high-pressure washer
should have no less than a C16 rat-
ing. If in doubt consult a qualified
electrician for further advice. Do not
attempt to modify your electrical
system yourself.
Remove the plug from socket
u
whenever the machine is left unat-
tended for any period.
The electric supply installation
u
should comply with IEC 60364-1.
Bosch Power Tools