Operation - EuroLite LED Neon Flex Mode D'emploi

90° Installation
5 cm channel
Other types of installation
End cap
Connection with the mains
Connect the power connector to the m ains. Mak e sure that the outlet is in a dr y area.
This lighting effect m ay not be connected to dimm ing pack s!
Connection with a controller
Connect the power cord with your controller.
After the installation, the power supply cable, the plug and the connector must be free of any tractive forces
and rotary forces.
The lighting chain must never be covered with any object.

OPERATION

After you connected the lighting chain to the mains, the lamps start burning.
L-connector
The last tube has to be terminated with an end cap. Please
make sure that you stick the end cap at the tube.
20/43
180° Installation
5 cm channel
50502955_V_1_0.DOC