Side Panels - Marantz professional PMD561 Guide D'utilisation

Side Panels

2 3
1
Left
1. Digital In Jack: Connect a digital audio cable with an RCA jack from an external device
providing S/PDIF digital output.
2. DC In Jack: Insert the provided AC adapter plug. If the AC adapter plug is inserted while using
the recorder on battery power, the recorder will automatically switch to adapter power. Also, if
the AC adapter plug is removed, the recorder will automatically switch to battery power.
3. USB Port (Mini-B): The USB Mode is started by connecting a USB cable while stopped.
4. Card Compartment: Pull the lid to access an SD card.
5. Speaker: Internal speaker of L channel.
Right
6. Speaker: Internal speaker of R channel.
7. Power Slide Switch: Slide and hold for a little time to turn power on. Slide to turn power off.
During Record and Rec-Pause Mode, the Power switch is invalid.
8. Key Lock Slide Switch: Slide switch for the Key Lock On and Off control.
9. Line Out Jacks: Insert an audio cable plug connected to an external audio device into these
jacks to output audio signals to an external device (amp, etc.)
10. Line In 2 Jack: Insert an audio cable plug connected to an external audio device into this
jack to input the signals output from the external device into the recorder.
11. Rec Level Control: Turn to adjust the record level when the Level Cont. of preset menu is
Manual. The inside control (Right channel) and outside control (Left channel) turn together,
unless you hold one while turning the other. The optimum record level is when the level meter
goes as close to 0 dB as possible but does not go over.
Left
4
5
Right
6 7 8 9
10
11
5