Ravelli RBV 7006 Manuel D'utilisation Et D'entretien page 56

Rev.0 09-07-19
Pag.56
EN
Examples of installation of a pellet insert
T fitting
Use and maintenance manual RBV 7006 - RBV 7008
Protection from rain
Flue
Pipe
Protection from rain
Flue
Pipe
In this type of installation we can notice that the fitting
was used to enable connecting the insert to the chimney
(so-called "bayonet" mount).
For safety reasons and to ensure proper operation, we
recommend you fit pipes into the chimney. (Fig.7)
It is recommended to perfectly match the insert with
the fitting, to prevent leaks of smoke during the work
phase.
View of T fit
Fig.7
Here you can see the possibility to slide
the insert; this operation can only be performed
with the stove turned off for loading pellets or during
regular checks. (Fig.8)
IT IS STRICTLY FORBIDDEN
TO REMOVE THE STOVE DURING
THE WORK PHASES; THE FUME
MAY DISPERSE INTO THE
Fig.8