Removing The Wire Or Glass Shelf - Zephyr brisas BWB24C32AG Guide D'utilisation, D'entretien Et D'installation

Installation Instructions
To prevent damaging the door or door gasket, make sure the door is open at least 90-degrees
when pulling shelves out of the rail compartment.
The door opens to a maximum of 135 degrees with a door stop on the bottom hinge preventing the
door from opening further.

Removing the Wire or Glass Shelf

18
1. Open the door completely unload any content within
the beverage cooler. Make sure the shelf is pushed
back completely.
2. Lift either the left or right side of the shelf to create a
45º angle from its original position. Make sure not to
lift either side of the shelf too hard as it may come in
contact with the inner wall mount.
3. Pull the shelf outward until it is removed from the inner
compartment. You may encounter some resistance
from the shelf guard rail.
BWB24C32AG Use, Care, and Installation Guide
B R I S A S
W I N E & B E V E R A G E
C O O L E R
D U A L ZO N E