Installation Instructions; Installation Clearance Requirements - Zephyr brisas BWB24C32AG Guide D'utilisation, D'entretien Et D'installation

Installation Instructions

Installation Clearance Requirements

When installing the wine and beverage cooler under a counter, follow the recommended spacing
dimensions shown.
For proper clearance of the electrical plug, allow at least 1" of clearance at the back as shown in
the diagram.
An installation next to a wall will require a minimum 2-1/4" door clearance to accommodate the
Brisas handle.
The cabinet should allow at least 24" for the width and 34" for the height to accommodate the
wine and beverage cooler.
The power cable is located on the back right of the unit and has a length of 72" to accommodate
multiple outlet locations.
Once you are ready to install the unit, you must adjust the feet to level the wine and beverage
cooler.
The installation should allow the unit to be pulled forward for servicing, if necessary.
16 BWB24C32AG Use, Care, and Installation Guide
B R I S A S
W I N E & B E V E R A G E
C O O L E R
D U A L ZO N E